6000w 240V 1ph 17″L Portable Sink Heater – SRA-6041

Description

SRA-6041 240V 6000w 1ph 17″L Immersion Portable Sink Heater

These immersion heaters are particularly applicable in sterilization tanks (SRA) and Sink in restaurants, taverns, etc,. They’ll fit any sink with a horizontal dimension of 14″ or more. Installation is a simple matter of plugging the unit in and fastening it to the sink with the stainless steel clamp provided. It can be mounted to permit cleaning the sink bottom without removing the heater.

Technical Specifications:

Features and Benefits:

• 26″ Riser (unheated section)
• Integral Control (60 – 250°F)
• Manuel Reset Cutout (set @ 50°F above temperature setpoint)
• Built-in Pilot Light
• 36″ Long Cor with 10 – 30P Plug

CH-OTS-608

093825

Baptistry Instructions [PLEASE READ]

Caution: Ensure that the heated portion of the heater does not contact the baptistery surfaces that may be compromised by heat. Our warranty is void under such circumstances and we will assume no responsibility for damage to he heater, associated equipment, or other damages.

Caution: Prior to the Baptismal service, the SRA Heater should be turned off, unplugged, and removed from the baptistery. There should be no bodily contact with the baptismal water while the heater is in the water. This will guarantee protection from the danger caused if an electrical short circuit were to occur in the SRA heater electrical system.