TXC-TXCC-urn-heater
txc-txcc-illustration

URN Heater 37521 7.5kw 208v 1ph No Cutout

Product Description

Application

Type TX immersion heaters are intended for use in steam tables, coffee urns, kettles, sterlizers, percolators and many other water heating applications where bottom-mount heater is most practical.

The heaters are not guanteed against corrosion since the manufacturer has no control over the liquid type, concentration or temperature.

Heaters must be kept free of heavy scale build-up to prolong life. Most importantly, the heating elements must be fully immersed in liquid during operation.

TXC heaters are primarily for water heating and have copper sheathed heating elements. These units do nto have a built-in low water cutout and should only be used where there is no chance that the water level will fall exposing the elements. Elements will fail if not completely immersed.

Other compatible part part numbers

UC-7521, UA-7521, TTUH-75R

Installation

After removal of the terminal box and the mounting ring, the heater is inserted from the inside of the tank. a 2 7/16″ (62mm) diameter opening in the vessel (which is normally of thin walled construction) is required to receive the brass mounting flange.

Enquiry

Additional Information

Type
Wattage

7500

Voltage

208

Phase
Sheath

COPPER

Dim. A

12 3/4

Dim. B

2 1/8

Dim. C
diameter
NO. of Rods

3

Cross Reference

UC7021,UA7021,UC-7021,UA-7021

Order Number

79C-37521

Reviews

There are no reviews yet.

Be the first to review “URN Heater 37521 7.5kw 208v 1ph No Cutout”