4kw 208v 1ph No Cutout Bottom Mounted URN Heater
Other compatible part part numbers
UC4021, UA-4021, TTUH-40R
Type TX immersion heaters are intended for use in steam tables, coffee urns, kettles, sterlizers, percolators and many other water heating applications where bottom-mount heater is most practical.
The heaters are not guanteed against corrosion since the manufacturer has no control over the liquid type, concentration or temperature.
Heaters must be kept free of heavy scale build-up to prolong life. Most importantly, the heating elements must be fully immersed in liquid during operation.
TXC heaters are primarily for water heating and have copper sheathed heating elements. These units do nto have a built-in low water cutout and should only be used where there is no chance that the water level will fall exposing the elements. Elements will fail if not completely immersed.
After removal of the terminal box and the mounting ring, the heater is inserted from the inside of the tank. a 2 7/16″ (62mm) diameter opening in the vessel (which is normally of thin walled construction) is required to receive the brass mounting flange.